Embossing raises the design up via the paper being squeezed between the male and female dies. Position your stationary in the jaw, press the lever and you will emboss your personal artwork. This machine is suitable for paper 80 to 120gsm.
The die is mounted in a spring-clip for easy clip-out, clip-in changing allowing for use with multiple embossing designs or multple die orientations.
For most artworks a Delrin die (engineering grade of plastic) is totally adequate. If your artwork includes fine detail a Metal die (with Bakelite counterpart) may be preferred.
- Round Die: Your design to be embossed needs to fit within 38mm diameter. Suitable for use with 45mm diameter adhesive backed foil seals/wafers with your design at 37 mm diameter circle.
- Rectangular Die: Your design to be embossed needs to fit within a 46x21mm rectangle. This is good for rectangular art such as text lines. (Delrin die only).
Maximum reach of this machine (from edge of paper to centre of your embossed artwork) is 41 mm
Machine’s Dimensions: Length 111 mm. Height when closed: 85 mm Height when open: 120 mm
- $475+GST with Delrin (plastic) Die (freight free)
- $675+GST with Metal Die (freight free)
Additional dies: Delrin: $275 + GST. Metal: $475+GST (less $100 if ordered with a machine with the same emboss design).
We can create artwork with text, circles and shapes without charge. For complex art we charge $25 per quarter hours for graphics work. Email a description of what you want embossed and we will quote.
TO ORDER: Order on this page, email your artwork as a PDF or email your outline of what you want to firstname.lastname@example.org Order additional dies separately. Phone 029948 6648 for assistance.